-
2025-06-12 15:09:35Advantages of VPSA oxygen generator in the application of papermaking enterprises
With the development of air separation technology, VPSA vacuum pressure swing adsorption technology has begun to be recognized by more and more papermaking enterprises. The characteristic of this technology is that the purity of oxygen produced fully meetRead More -
2025-06-12 14:57:29General technical conditions for oxygen supply terminals and alarm devices in medical centers
In our country's pharmaceutical industry standards, there are clear technical regulations for oxygen supply terminals and alarm devices in medical centers. Terminals and alarm devices should meet the following technical conditions to meet relevant natiRead More -
2025-06-12 14:14:30What factors will affect the running cycle of PSA oxygen & nitrogen generation equipment
When CAN GAS design the air separation oxygen & nitrogen generation equipment, the accumulation of trace carbon dioxide after entering the air oxygen & nitrogen adsorption tower will be considered, because carbon dioxide will block the microporesRead More -
2025-06-12 14:03:50How to Clean the Pipes of a Medical Oxygen System
All gas pipes should be degreased, cleaned and packaged before piping installation of the medical oxygen system; they should be distinguished from ungreased pipes to prevent confusion. Specifically, the cleaning of the pipes can be carried out using the fRead More -
2025-06-12 13:44:22How to do water supply, drainage and fire protection in PSA oxygen generator room
With the development of modern medical technology, many hospitals have begun to build their own oxygen plants to meet the oxygen needs of doctors and patients. Due to the special purpose of the medical oxygen generator room, there are many things to be coRead More -
2025-06-12 13:38:40How to maintain the medical oxygen generator
For the PSA medical oxygen generator, regular maintenance is very necessary, it can avoid the occurrence of equipment failure, reduce maintenance costs and prolong the service life of the equipment.Read More -
2025-06-12 13:18:30How to reduce the noise in PSA oxygen generator room
As an industrial mechanical equipment, the noise from the oxygen production system is a problem that goes hand in hand; there are many ways to solve these "by-products" from high-speed air compressors and gas discharge outlets.Read More -
2025-06-12 11:49:31Startup Steps and Notes of PSA Nitrogen Generator
Startup Protocol and Precautions for Pressure Swing Adsorption Nitrogen GeneratorsRead More -
2025-06-12 11:44:56 How to judge whether the oxygen or nitrogen generator problem is caused by forced valve or automatic valve
In the air oxygen/nitrogen equipment, whether the forced valve or the automatic valve is not closed tightly, it will cause medium and low pressure blow-by, which will increase the air flow and reduce the air pressure.Read More -
2025-06-12 11:11:33High-Purity PSA Nitrogen Generators in HV Cable Manufacturing
In the production of this kind of cable, peroxide crosslinking agent should be added to the polyethylene insulating material, and the extrusion of conductor shielding layer, insulating layer and insulating shielding layer should be completed through threeRead More
